Terms and Conditions

---

 1. Excavator Positioning

 Park the excavator with the bucket cylinders oriented vertically at a 90 angle to the ground. Ensure the bucket is fully curled in and rests securely  against the stops. This stabilizes the machine and minimizes movement  during the protection system installation.

 2. Clamp Bracket Installation 

Using an Elevated Work Platform (EWP), position the cylinder clamp brackets  near the base of each bucket cylinder tapers.

•  Remove the M16 clamp pivot bolt during initial placement.

•  Once the clamp is properly seated, reinstall the M16 pivot bolt followed  by the M20 tensioner bolt. 

• Ensure both clamps are mounted at an equal height, aligned parallel to  each other, with the conveyor belt bolting surface facing forward. 

3. Conveyor Belt Protector Positioning

 With the aid of a crane, lift the conveyor belt protector into position using the  two designated lifting points located at the top of the structure. 

 4. Fastening and Torqueing

 Once the protector is aligned, install  required torque, 350NM

•  Use spring washers and secure each connection with double nuts or  lock nuts to prevent loosening during machine operation.

 5. Maintenance Recommendation 

Mine Design recommends replacing the bucket cylinder protection brackets  and associated hardware whenever the conveyor belt section is replaced, due  to potential fatigue in the bracket components.

1. General

These Terms & Conditions (“T&Cs”) apply to the sale, supply, and use of the Bucket Cylinder Protector (“the Product”). By purchasing, installing, or using the Product, the purchaser/user (“the Customer”) acknowledges and agrees to be bound by these T&Cs.

2. Intended Use and Assumption of Risk

(a) The Product is provided as an accessory designed to offer additional protection but is not a substitute for correct operation, maintenance, or servicing of machinery.

(b) The Customer accepts full responsibility for the selection, installation, and use of the Product.

(c) Use of the Product is entirely at the Customer’s own risk.

3. Australian Consumer Law

Nothing in these T&Cs excludes, restricts, or modifies any consumer guarantees, rights, or remedies conferred by the Competition and Consumer Act 2010 (Cth) or any other applicable legislation that cannot lawfully be excluded (“Non-Excludable Guarantees”).

4. Limitation of Liability

(a) To the fullest extent permitted by law, the Supplier:

• excludes all warranties, conditions, and representations (express or implied) not contained in these T&Cs;
• is not liable for any machine malfunction, wear, breakdown, or damage of any kind arising out of the use, installation, or misuse of the Product.
  (b) Where liability for breach of a Non-Excludable Guarantee cannot be excluded, the Supplier’s liability is strictly limited, at the Supplier’s election, to:
• the replacement of the Product,
• the supply of an equivalent product,
• the repair of the Product,
• the payment of the cost of replacing the Product or acquiring an equivalent product, or
• the payment of the cost of having the Product repaired.

5. Consequential Loss Exclusion

To the maximum extent permitted by law, the Supplier is not liable for any indirect, incidental, or consequential loss or damage, including (without limitation):

• loss of revenue, profit, business, contracts, or anticipated savings,
• downtime or loss of use of machinery,
• costs of labour, parts, or servicing,
• damage to other property.

6. Customer Responsibilities

The Customer is solely responsible for:

(a) correct installation and use of the Product;

(b) ensuring the Product is suitable for their machine and operating conditions;

(c) regular inspection and maintenance of the Product;

(d) safe operation of machinery at all times.

7. Indemnity

The Customer indemnifies and holds harmless the Supplier, its officers, employees, and contractors from all claims, losses, damages, liabilities, and expenses (including legal costs) arising from or connected with the Customer’s use, installation, or reliance on the Product.

8. Governing Law

These T&Cs are governed by the laws of the State or Territory in which the Product is supplied, and the parties submit to the non-exclusive jurisdiction of the courts of that State or Territory.

 Safety Warnings and Precautions 

• The bracket must only be used for its intended purpose. Do not utilize it for  lifting or hoisting applications. 

• Modifications to the bracket or associated components are strictly prohibited. 

• Hardware fatigue may occur with repeated use; inspect regularly and replace  as necessary.  

• Replace the rubber flap immediately upon detection of damage to avoid  potential harm to the machine. 

• The cylinder protector is designed solely to deflect small falling objects. Do  not repurpose or adapt it for alternative functions. 

• Maintain a safe distance from pinch points during the tightening of hardware  to avoid injury.  

• Use certified lifting equipment at all times when installing or removing the  protector.  

• Avoid overtightening of bolts and fasteners. Adhere to recommended torque  specifications.

•  Never stand beneath the protector during removal, installation, or while the  machine is in operation.  

Important: Improper use or modification of the Bucket Cylinder Protector may  compromise its functionality and void liability coverage provided by Mine  Design Pty Ltd. Users must read and comply with all instructions and  warnings accompanying this product.